Locking And Unlocking The Brakes; Manually Release The Brakes; Reset The Electronic Brakes After Being Manually Released - Hillrom Allen A-71101 Manual Del Usuario

Instructions for Use
L
OCKING AND UNLOCKING THE BRAKES
WARNING:
Do not press the Lock control while the Allen Advance Table
is being moved. Equipment damage could occur.
•
Lock—press and hold the Lock control until the locked
indicator on the display is green.
•
Unlock—press and hold the key control as you
press the unlock control until the unlocked
indicator on the display is orange.
When the brakes are locked, the locked indicator on the
display is green; when the brakes are not locked, the
unlocked indicator is orange.
During a loss of power, if the brakes are locked and it is
necessary to move the Allen Advance Table , use the Emergency brake
releases on both columns to manually unlock the brakes.

Manually Release the Brakes

Pull the emergency brake release on both
columns.
NOTE:
Each column has a release. You must pull
both releases to unlock the brakes. The handles do not have to be pulled
at the same time.

Reset the Electronic Brakes after being Manually Released

After you use the emergency brake releases to unlock the brakes, you must
do these steps to lock or reset the brakes:
Make sure there is power to the Allen
Advance Table, and its On/Off switch
is on.
Press and hold the Key control as you press the
Unlock control. You will hear the brakes move.
22 Allen® Advance Table User Manual (D-720761 Ver D)