Turn the Allen Advance Table off,
and unplug the power cord from the
facility's power source and from the
Allen Advance Table.
Pull the fuse holder from the plug
housing.
NOTE:
You may need to use a small
screwdriver or a pen to pry the holder
from the housing.
Remove the fuses from the holder.
Replacement
Install the new fuses in the holder.
Fully insert the holder into the plug housing.
Plug the power cord into the Allen Advance Table outlet and into an
applicable power outlet, and then turn the Allen Advance Table on.
Make sure all Allen Advance Table functions operate correctly.
ACCESSORIES
For installation and use instructions, refer to the manufacturer's
documentation included with the accessory.
WARNING:
Weight ratings may differ for some accessories used with
the Allen Advance Table. Make sure you do not exceed the
weight rating that is shown on the accessory. To do so
could cause patient fall, injury, or equipment damage.
Part Number Description
A-40022
A-40024
A-70404
Allen® Advance Table User Manual (D-720761 Ver D)
Easy Lock® socket
(US)
Easy Lock® socket
(UK)
Supine access top,
12" (304.8 mm)
Part Number Description
A-40023
Easy Lock® socket
(EU)
A-70310
Comfort mask
disposables
A-70434
Supine 12"
(304.8 mm) access
top section pad, 2"
(50.8 mm) Astrus
Accessories
51