Hillrom Allen A-71101 Manual Del Usuario página 56

Specifications
Electromagnetic Emissions Guidance
WARNING:
When using the table near high-frequency surgical
equipment, a defibrillator or defibrillation monitor, follow the
instructions of the product manufacturer so the equipment
will work as intended.
This device meets all requirements for electromagnetic compatibility per
IEC 60601-1-2. Other products that are used near the Allen Advance Table
should also comply with this standard. Otherwise, electromagnetic
interference between the products could cause the products to operate
incorrectly. If problems do occur, contact the product manufacturer(s).
WARNING:
The A71100-XX/ A-71101-XX should not be used adjacent to
other electrical equipment. If adjacent use is necessary,
observe the A-71100-XX/A‑ 71101-XX and the other
electrical equipment to make sure they operate as intended.
Caution:
This device meets all requirements for electromagnetic
compatibility per IEC 60601-1-2. It is unlikely that the user
will encounter problems with this device because of
inadequate electromagnetic immunity. However,
electromagnetic immunity is always relative, and standards
are based on anticipated environments of use. If the user
observes unusual device behavior, particularly if such
behavior is intermittent and associated with nearby use of
radio or TV transmitters, cell phones, or electro-surgical
equipment, this could be an indication of electromagnetic
interference. If such behavior occurs, the user should try to
move the interfering equipment further from this device.
Make sure the A-71100-XX/ A-71101-XX operate correctly when used near
other electronic devices. Portable and mobile radio frequency (RF)
communications equipment can affect electrical equipment.
Medical equipment needs special precautions in regard to electromagnetic
compatibility (EMC) and needs to be installed and put into service
according to the EMC information supplied in the tables that follow.
56 Allen® Advance Table User Manual (D-720761 Ver D)