EN
Safety Information
The appliance is intended for heating food and beverages. Drying
of food or clothing and heating of warming pads, slippers,
sponges, damp cloth and similar may lead to risk of injury,
ignition or fire.
Make sure you never catch the power cables of other electrical
appliances in the hot door or the oven. The cable insulation may
melt. Danger of short-circuiting!
Do not lean or sit on the open oven door. This may damage the
oven, especially in the hinge zone. The door can bear a
maximum weight of 8 kg.
The grills can bear a maximum load of 8 kg. To avoid damaging
the oven, do not exceed this load.
INSTALLATION
The electrical installation is to be set up so that the appliance can
be isolated from the mains with a minimum 3mm all-pole contact
separation.
Suitable separation devices include e.g. cutouts, fuses (screw
fuses are to be taken out of the holder), RCD's and contactors.
This installation must comply with current regulations.
If the electrical connection is done through a plug and this
remains accessible after installation, then it is not necessary to
provide the mentioned separation device.
Protection against electric shock must be provided by the
electrical installation
Warning: The oven must be earthed.
CLEANING
The appliance should be cleaned regularly and any food deposits
removed.
Failure to maintain the appliance in a clean condition could lead
to deterioration of the surface that could adversely affect the life
of the appliance and possibly result in a hazardous situation.
4