Add A Cellar - La Sommeliere ECELLAR185 Manual De Instrucciones

Add a cellar

Add a connected wine cellar
▪ Define the type of cellar "connected cellar" or "non-connected cellar". The ECELLAR185
model is part of the "connected cellar" category. Click on "connected cellar".
▪
Scan the QR code of your cellar to allow the application to identify it and connect to it. The
QR code is located inside your cellar, under the master box placed at the top right of the
cellar.
▪
The application asks you to activate bluetooth; its activation is necessary to configure the
cellar.
▪
Once your cellar is connected to bluetooth, the application asks you to select a Wifi network
or to use a WPS protocol:
o
In the case of a Wi-Fi network, the Wi-Fi router password is requested. If the Wi-Fi
connection fails, check the password and / or check the distance between your cellar
and your Wi-Fi router. A large distance or thick walls can block the connection. Move
You now have a VINOTAG® account to add your first cellar or a new cellar
(the application offers you the possibility of managing several cellars from a
selection of models).
Warning ! Under no circumstances should you quit the application when
adding a cellar.
▪
Adding a first cellar: the creation of your cellar is mandatory when
creating your account, follow the different steps below.
▪
Adding a new cellar: you want to manage a new cellar from your
application, go to the "profile" -> "my cellars" page and click on the
"add a cellar" button; follow the different steps below.
64