View the location of your bottles in your cellar
You are on view from your cellar; Use the search icon located at the top right of your screen
Indicate the name of the desired wine and / or domain and / or other information related to the bottle
The wine sheet of the desired bottle is displayed
Click on the button located at the bottom of the page "See my bottles" or on the button "Show in the
cellar" located at the beginning of your wine sheet.
Indicator lights light up in your cellar, up to a limit of 12 simultaneously, to show you the location of the
bottle (s) you are looking for.
Cellar maintenance
From the cellar configuration, it is possible to put your cellar in maintenance.
This manipulation blocks all movements that may take place in the cellar (addition,
movement, deletion).
The reception view is therefore blocked by a "cellar under maintenance" view
To exit maintenance mode, click on the "Exit maintenance" button.
Warning ! When you exit maintenance mode, you can:
▪
Reload the last registered layout
▪
Go back to an empty cellar. In that case you have to restart process from the beginning and
scan your first bottle.
6. CARE AND MAINTENANCE
Before cleaning your appliance (something that should be done regularly), disconnect it by removing
the plug or by pulling the fuse on the circuit.
Before using your appliance for the first time and regularly after that, we recommend that you clean the
inside and outside (front, side and top) with warm mixed with a gentle cleaning product. Rinse with
clean water and allow drying before reconnecting. Do not use solvents or abrasives.
When the appliance is switched on for the first time, there may be a residual smell. In that case, runt
the appliance empty for a few hours at the coldest possible temperature. The cold will kill any smell.
Automatic defrost
An automatic defrost is programmed on your cellar. There is no impact for wines stored in the cellar
during the defrosting phase.
During defrost; the compressor and the fans will be off. The digital display will show normal
temperature, however if you want to display the actual temperature of your cellar, the display will show
you the code "DD" which is normal.
70