La Sommeliere ECELLAR185 Manual De Instrucciones página 67

-
Rate the bottle (0 to 5)
-
Buying price
-
Link to VIVINO® to find the complete sheet (Premium Option)
-
Link to VIVINO® to buy this wine
▪
The scanned bottle is not recognized: if the bottle is not recognized, the application offers to
restart the scan, to manually search for the bottle (if no bottle corresponds to its search) or to
fill manually the sheet.
▪
It is mandatory to enter a minimum and maximum conservation time to receive peak date
alerts. If the minimum and maximum conservation time fields are not completed, no peak date
alert will be sent.
You add a bottle in a "Connected cellar"
Place the bottle / s in your cellar on the desired location / s;
▪
VINOTAG® informs you of the detection of your bottle / s and records its / their location / s on
the digital version of your cellar.
▪
When the bottle is placed and detected, the corresponding front shelf indicator light flashes
twice quickly. The location is remembered in your app. A success pop-up is then displayed
with two buttons: "Add a bottle" or "Done".
▪
Attention! If you would like to place bottle (s) in the storage area at the bottom of your cellar,
please note that this part of the cellar is not connected.
▪
Click on "+" to continue adding bottles to your cellar.
To note !
The storage area at the bottom of your cellar is not connected.
However, the application allows you to keep a digital register of the bottles that you placed at this
location.
• The actual capacity of the storage area is 17 champagne-format bottles.
• The application nevertheless allows you to register a larger number of bottles, allowing you
to keep a register of wines not stored in your cellar.
E-Sommelier function
When adding a bottle to a "connected cellar"; you can use the E-Sommelier function. This feature
recommends the ideal location to store your wine. When you scan a bottle, VINOTAG® identifies
the type of wine; storage temperatures are recommended for each type of wine for optimal
conservation.
Certain locations in your cellar are therefore more suitable depending on the type of wine.
The E-Sommelier function helps you to keep your wine in the best conditions. By clicking on this
button, the cellar offers you available locations suitable for the scanned bottle of wine; indicator
lights light up in the cellar to show you these locations.
o
When the bottle is placed and detected, the corresponding indicator light flashes
twice quickly. The location is remembered in your app. A success pop-up is then
displayed with two buttons: "Add a bottle" or "Done".
o
Attention! In the event of a failure, where your cellar cannot detect the bottle, the
indicator light will not flash. Carry out the manipulation again until the bottle is
correctly detected and the indicator light flashes twice.
o
Warning ! If you do not come to pick up / drop off your bottle, the indicator light on
the front of the shelf will remain on for 5 minutes, after which time the indicator light
will go off automatically.
It is also possible to add a bottle via a wine sheet.
o
Click on the button located at the bottom of the page "add one or more bottles"
67