Diadynamic Currents; Medium Frequency Interrupted Direct Current - Enraf Nonius Sonopuls 492 Instrucciones De Manejo

• Alternation sequence (only with
• Ramp up time:
Select with button [12] and adjust its value with the central controller [16];
• Hold time:
Select with button [12] and adjust its value with the central controller [16];
• Ramp down time:
Select with button [12] and adjust its value with the central controller [16];
• Surge program (only with
• Ramp up time:
Select with button [12] and adjust its value with the central controller [16];
• Hold time:
Select with button [12] and adjust its value with the central controller [16];
• Ramp down time:
Select with button [12] and adjust its value with the central controller [16];
• Interval time:
Select with button [12] and adjust its value with the central controller [16];
• Delay time (only available with linked channels):
Push button [13] and select channel 2 with the central controller [16].
Select with button [12] and adjust its value with the central controller [16];
• Polarity (only with
Select or with button [13] and the central controller [16];
• Select the desired channel with button [13] and the central controller [16]. Adjust the intensity with controller [17];
• Push button [14] to start the therapy in case a surge program was selected.

5.2.2.7. Diadynamic currents

• Push button [7] to select . Use the central controller [16] to select the desired channel or to link the channels;
• Push button [8], select
• Select MF, DF, LP , CP or CPid with the central controller [16] and press button [14] to accept;
• Treatment time:
Select with button [12] and adjust its value with the central controller [16];
• Surge program (only with MF and DF):
• Ramp up time:
Select with button [12] and adjust its value with the central controller [16];
• Hold time:
Select with button [12] and adjust its value with the central controller [16];
• Ramp down time:
Select with button [12] and adjust its value with the central controller [16];
• Interval time:
Select with button [12] and adjust its value with the central controller [16];
• Delay time (only available with linked channels):
Push button [13] and select channel 2 with the central controller [16].
Select with button [12] and adjust its value with the central controller [16];
• Select CC or CV with button [13] and the central controller [16];
• Polarity:
Select or with button [13] and the central controller [16];
• Select the desired channel with button [13] and the central controller [16]. Adjust the intensity with controller [17];
• Push button [14] to start the therapy in case a surge program was selected.

5.2.2.8. Medium frequency interrupted direct current

• Push button [7] to select . Use the central controller [16] to select the desired channel or to link the channels;
• Push button [8], select
• Treatment time:
Select with button [12] and adjust its value with the central controller [16];
• Select the desired channel with button [13] and the central controller [16]. Adjust the current intensity with
controller [17];
• Polarity:
Select or with button [13] and the central controller [16];
• Select the desired channel with button [13] and the central controller [16]. Adjust the intensity with controller [17];
• Push button [14] to start the therapy in case a surge program was selected.
selected):
selected):
selected):
with the central controller [16] and press button [14] to accept;
with the central controller [16] and press button [14] to accept;
39