Mounting Tubeless And Supersingle Tyres; Demounting Wheels For Earthmoving Machines And Witha Side Ring - Mondolfo Ferro TBE160 TERRA Manual De Uso

MOUNTING TUBELESS
AND SUPERSINGLE
TYRES
When mounting tubeless tyres, tighten the
pliers (Fig. 33) on the front edge of the
rim, place both beads beyond the pliers,
position the tool flush with the rim edge
and turn the turntable clockwise. Pay
attention to the correct position of the
beads in the rim well.
In this way, the tyre will be completely
mounted.
N.B. To mount the tyre correctly and
without any damage, lubricate the beads
and the shoulder of the rim abundantly.
For the separate mounting of the beads (for
tubeless and super single tyres) proceed as
described in the "MOUNTING AGRICULTURE
WHEELS" chapter
DEMOUNTING WHEELS
FOR EARTHMOVING
MACHINES AND WITH
A SIDE RING
Position the bead breaker disc flush
with the rim.
Keeping the tyre rotating, press with
the bead breaker disc on the front bead
(Fig. 34) until freeing the lock ring that
is extracted with the specific lever (A,
Fig. 35).
Repeat the bead breaking operation on
the rear side as shown in Fig. 36 and
continue until the tyre comes out, with
or without the side ring.
N.B. For wheels that are particularly hard
and locked on the side ring, demount
the tyre with the side ring still attached.
To remove it, fix it to the turntable (Fig.
36) like a normal rim and break it from
the rear.
76
a
- E - Operator's manual
nGlISH
Fig. 33
Fig. 34
Fig. 35