Trouble Shooting - Mondolfo Ferro TBE160 TERRA Manual De Uso

No current
➥ Provide power
The overload cut motor protector(s) is(are) not active
➥ Activate the overload cut motor protector(s)
Transformer fuse broken
➥ Replace the fuse
u
nion looSe
➥ Tighten the union
Pipe cracked
➥ Replace the pipe
Switch broken
➥ Clean or replace the switch
Solenoid valve stuck
➥ Clean or replace the solenoid valve
The distributor leaks
➥ Replace the distributor
Gaskets worn
➥ Replace the gaskets
e
xCeSS trolley ClearanCe
Contact technical service to adjust the
sliding blocks
l
oSS oF poWer in turntable rotation
Loose belt
➥ Tighten the belt
M
otor StopS during uSe
Overload cut motor protector activated
➥ Open the electric system box, then
reactivate the overload cut motor
protector by turning the grey bar (A,
Fig. 38); at the end, reclose the electric
system box.
t
he MaChine doeS not Move
Current does not arrive to the solenoid valve
➥ Check the electric connection to the
solenoid valve
78

TROUBLE SHOOTING

t
he MaChine doeS not Start
o
il leak
a
Control reMainS aCtivated
t
urntable Cylinder preSSure drop
a
- E - Operator's manual
nGlISH
Fig. 38