Fitting Return Adapter For Passenger Vehicle Injectors; Fitting Return Adapter For Commercial Vehicle Injectors With Hose Connection - Bosch CRI 848H Instrucciones Para La Instalación

�.5 Fitting return adapter for passenger
vehicle injectors
i
All the items required are contained in the parts set
1 687 016 044.
i
Barb nipples (Pos. 1) are supplied with black plastic
washers. These are not required and therefore they
have to be removed.
1. Turn barb nipple (Pos. 1) with flat sealing ring
(10.2 x 13.5 mm) into drainage connector (Pos. 2)
and tighten.
2. Pull O-ring (3.5 x 1.25 mm) into turned groove of
drainage connector (Pos. 2).
1
2
458804-16
Fig. 6: Mounting drainage adapter
Robert Bosch GmbH
Preparatory work for accessory | CRI�CRI� ���� | 2�
�.6 Fitting return adapter for commercial
vehicle injectors with hose connection
i
All the items required are contained in the parts set
1 687 016 038.
1. Bolt plug nipple (pos. 1) with flat sealing ring
(10.2 x 13.4 mm) into the distributor head (pos. 2)
and tighten.
2. Bolt hose supports (pos. 3) with flat sealing ring
(10.2 x 13.4 mm) into the distributor cap at the front
end and tighten.
3. Lift hose line (pos. 4) onto the hose supports and
fasten with two hose clips (pos. 5).
4. Lift the other two hose clips onto the other end of
the hose line.
4
3
5
Fig. 7: Assembly return adapter
CRI�CRI� ���� | 2� | 2� en
1
2
3
4
5
|
1 689 978 562 2012-03-29