Chapter 1. Foreword; Preface; Packaging Machine Performance; Machine Technical Data - Minipack-Torre FM76A Digit Instrucciones Para La Instalación, Uso Y Mantenimento

Chapter 1. Foreword

1.1. Preface

This manual has been drawn up in compliance with the UNI10893 standard dated July 2000. It is meant for all users in
order to enable them to use the machine correctly. Keep it in a place which can be easily accessed in the proximity of the
machine and which is known to all users. This manual is an integral part of the machine for safety reasons. We wish to
specify the symbols in use here below in order to improve understanding of them.
ATTENTION:
Accident prevention rules for the operator. This warning indicates the presence of dangers which
can injure the person operating on the machine.
ATTENTION:
Hot parts. Shows the danger of burning, thus involving the risk of a serious accident for the exposed
person.
WARNING:
It indicates the possibility of damaging the machine and/or its components.
All reproduction rights of this manual are reserved to the manufacturer. Partial or complete reproduction is forbidden as
provided by the law. Descriptions and pictures provided in this manual are not binding. Therefore the manufacturer,
reserves the right to make any change considered necessary. This manual cannot be transferred for viewing to third
parties without authorisation in writing from the manufacturing company. The machine must be used only for the purpose
it was built for. Any other use shall be considered "improper" and therefore dangerous. Before carrying out any operation
on the machine it is compulsory to read carefully all instructions provided in this manual, in order to avoid possible
damage to the machine, to people and property.
Do not operate if in doubt about the correct interpretation of the instructions.
Contact the manufacturer in order to obtain the necessary explanation.
Upon delivery check that the machine is complete in all parts.
Possible faults shall be immediately reported to the manufacturer.
The manufacturing company declines any liability in case of machine improper use and/or in case of damage resulting
from operations carried out on the machine that are not mentioned in this manual.

1.2. Packaging machine performance

You have bought a machine with outstanding features and performance and we thank you very much for choosing it. The
system is unique and has achieved worldwide success with more than 80000 units operating in the packaging and
wrapping sector.
The technological concept of its design, as well as the components and materials used in the manufacturing and testing
process are the best assurance of proper operation and lasting reliability.
Thanks to its particular operating circuit, it can be used both as a sealing and shrinking machine or as a sealing machine
only. In the latter case it is possible to pack the object in a soft bag without shrink-wrapping.

1.3. Machine technical data

Package weight and sizes
Width = 1480 mm
Length = 1000 mm
Height = 850 mm
Weight = 197 Kg
Machine weight and sizes
a = mm1570 b = mm750
Electrical system
Voltage (V): see data on plate
Frequency (Hz): see data on plate
Maximum absorbed power (W): see data on plate
Maximum absorbed current (A): see data on plate
N.B.: When contacting the Manufacturer, always indicate the model and the serial number
specified on the plate on the rear part of the machine.
Maximum production
650 packs/hour.
c = mm500 d = mm1400
11
Weight = 152 kg (figure 1.3. page 65).
GB