Spare Parts; Disassembling, Demolition And Elimination Of Residuals; Chapter 8. Guarantee; Certificate Of Guarantee - Minipack-Torre FM76A Digit Instrucciones Para La Instalación, Uso Y Mantenimento

Chapter 7. Ordinary maintenance

7.10. Spare parts

Code
S02A0404
FE385602
FM350009
S0K00306
FE240006 (230/380/415V)
FE240004 (200V)
FE240005 (208V)
FM080037
FM170002
S0K00604
S0K00605
FE381031+FE381032 (380V)
FE381033+FE381034 (230V)
FE381035+FE381036 (200/208V)
FE381057+FE381058 (415V)
S02A0602
S0K01110
FM195012
FE440613 (380/415V)
FE440612 (200/208/220V)
FE440026 (380/415V)
FE440025 (200/208/220V)

7.11. Disassembling, demolition and elimination of residuals

ATTENTION!
All disassembling and demolition operations must be done by qualified personnel with mechanical and
electrical expertise required to work in safe conditions.
Proceed as follows:
1. disconnect machine from power mains
2. disassemble components
All wastes must be treated, eliminated or recycled according to their classification and to the procedures in
force established by the laws in force in the country where the equipment has been installed.
The symbol indicates that this product shall not be treated as household waste. By making sure that the
product will be properly disposed of, you will facilitate the prevention of potential negative effects for the
environment and human health, which might be otherwise caused by the improper waste treatment of this
product. For more detailed information about the recycling of this product, please contact the product
seller or, as an alternative, the after-sales service or the corresponding waste treatment service.

Chapter 8. Guarantee

8.1. Certificate of guarantee

The guarantee runs for 12 months after the installation date under the conditions set out in the instruction manual. Fill in
the card with all data requested, tear out along the perforations and send in.

8.2. Guarantee conditions

The guarantee runs for 12 months and comes into force on the installation date of the machine. The guarantee covers
free replacement or repair of any parts due to defects arising from faulty material. The repairs or replacement are usually
carried out at the manufacturer's premises, with transport or labour charged to the buyer. If the repair or replacement is
carried out at the buyer's premises, he shall bear the travelling, transfer and labour costs. Work under guarantee can be
carried out exclusively by the manufacturer or by the authorised dealer. In order to be entitled to repairs under the
guarantee, the faulty part must be sent for repair or replacement to the manufacturer or his authorised dealer. The return
of such repaired or replaced part will be considered fulfilment of the guarantee. The guarantee is voided:
1. in case of failure to mail the CERTIFICATE OF GUARANTEE, duly filled in and signed, with in 20 days after the date
of purchase.
2. in case of inappropriate installation, power supply, misuse and mishandling by unauthorised persons.
3. in case of changes made to the machine without prior agreement in writing from the manufacturer.
4. if the machine is no longer the property of the first buyer.
The manufacturer declines all liability for personal injury or damage in case of inappropriate installation or
connection to the power mains or omission of connection to earth or in case of any mishandling of the machine.
The manufacturer undertakes to carry out any variations and changes made necessary by technical and
operating requirements.
Item description
Teflon liner
Sealing blade
Upper neoprene rubber
Blade holder complete clamp
Motor
Upper hood
Torsion bar
Complete slotted microperforator
Complete needles microperforator
Heaters
Reel holder complete tube
Fan
Glass wool panel
Cut transformer
Auxiliary transformer
18
GB
GB