Setting Up Set A - Christie LX41 Manual De Usuario

Setting up Set A

1.
Turn on Set A.
2.
Set the lens position to the upper limit
• If it is not set to the upper limit, the image of Set B may not
NOTE
superimpose well enough to the image of Set A.
• Perform the MIRROR setting first if
position. (Operating Guide
• HORIZONTAL adjuster is
3.
Adjust the image of Set A to fit the screen with the VERTICAL adjuster,
HORIZONTAL adjuster, ZOOM ring and FOCUS
Displaying the
Adjust the image position using KEYSTONE and PERFECT FIT if
(Operating Guide
• Do not adjust ZOOM ring to the widest position, otherwise the
NOTE
image of Set B may not superimpose well enough to the image of Set A. Fine
adjusting the image position of Set B electrically does not increase its image
size. Use the ZOOM ring to adjust the image size of Set B to slightly larger
than Set A.
• KEYSTONE cannot be operated when PERFECT FIT is in use. To adjust
the image using both KEYSTONE and PERFECT FIT, adjust KEYSTONE
first.
• If you are using Simple Stack, go
B). ( 11 )
(Set
4.
Display the menu
menu function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu will appear on
(Operating Guide
(continued on next page)
LX41/LW41 User Manual - Instant Stack Guide
→ SETUP
recommended to be set near the center position.
picture)
→ EASY MENU
with the MENU
screen.
→
OPTION
with the VERTICAL
necessary as it may change the image
menu)
ring.
or SETUP menu)
to 2.3 Installation of the second projector
button. (Operating Guide
menu)
9
Installation
adjuster.
(Setup Guide →
necessary.
→
Using the
020-000509-01 Rev.1 (06-2012)