Inputting Image From Main To Sub - Video Signal (Either Component Or Video); Inputting Image To Sub And Main Individually - Christie LX41 Manual De Usuario

Setting input ports using menu
Inputting image from Main to Sub
- Video signal (either component or video)
1.
If the STACK menu is already displayed on the screen, proceed to 3 below.
Otherwise press the MENU button on the remote control.
If the MENU dialog is displayed, use the ▲/▼ buttons to highlight MAIN, and
press the ► button. A menu will be displayed.
If the MENU dialog is not displayed, the STACK
2.
Press the MENU button on the remote control
or control panel on the Main
▲/▼/◄/► buttons to open the COMPUTER IN
dialog. (Operating Guide
3.
input component signals to COMPUTER IN1 or IN2, set the port to AUTO.
To
Then, use the ▲/▼/◄/► buttons to highlight EXIT and press the ► button to
complete the setting.
To input video signals to COMPUTER IN1 or IN2, set the port to VIDEO. If it
is necessary to select a video format, use the ▲/▼/◄/► buttons to highlight
RETURN and press the ◄ button to display the INPUT menu. Otherwise, use
the ▲/▼/◄/► buttons to highlight EXIT and press the ► button to complete
the setting.
4.
Select VIDEO FORMAT in the INPUT
menu to display the VIDEO FORMAT dia-
log.
Select AUTO or an appropriate format for
the video signal input.
Then, use the ▲/▼/◄/► buttons to highlight EXIT and press the ► button to
complete the setting.

Inputting image to Sub and Main individually

1.
If the STACK menu is already displayed on the screen, proceed to 3 below.
Otherwise press the MENU button on the remote control.
If the MENU dialog is displayed, use the ▲/▼ buttons to highlight MAIN, and
press the ► button. A menu will be displayed.
If the MENU dialog is not displayed, the STACK menu will
2.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu
(Operating Guide
(continued on next page)
LX41/LW41 User Manual - Instant Stack Guide
projector. Use the
→
will appear on screen.
OPTION
→
INPUT menu)
menu)
32
menu will appear.
appear.
020-000509-01 Rev.1 (06-2012)