Christie LX41 Manual De Usuario página 28

STACK menu settings
3.7 Important information for Intellectual Stack
● If you need to turn off a projector for reasons such as taking corrective actions
for an error, turn off both the projectors so that Intellectual Stack can be started
properly when the projectors are turned on again.
● If the PIN LOCK or TRANSITION DETECTOR security function on both
projectors is set to ON, both projectors will turn on. Enter the security code for
Main first then followed by Sub. If ALTERNATE mode is selected, one of the
projectors will turn off
● If the PIN LOCK or TRANSITION DETECTOR security function on one of the
projectors is set to ON, it is necessary to enter the security code as follows
when turning on the projector.
- In DUAL mode, both projectors will turn on. Enter the security code for the
projector that is locked by the security function.
- In ALTERNATE mode, if the projector locked by the security function is due
to turn on according to the ALTERNATE mode setting, only that projector will
turn on. Otherwise, both projectors
the projector that is locked by the security function. After the security lock is
released, one of the projectors will turn off if both projectors are turned on.
LX41/LW41 User Manual - Instant Stack Guide
(continued)
automatically. (Operating Guide
will turn on. Enter the security code for
26
→
SECURITY menu)
020-000509-01 Rev.1 (06-2012)