Important Information For Intellectual Stack - Christie LX41 Manual De Usuario

STACK menu settings

3.7 Important information for Intellectual Stack

This section provides important information for setting up the Main and Sub
projectors, not explanations on operating the menus. Read all information carefully.
● To use Intellectual Stack, one projector must be set to Main and the other set to
Sub.
● When stacking the two projectors, the control panel of the projector placed
underneath cannot be operated. It is therefore strongly recommended to set the
projector underneath to Sub and the projector on top to Main.
● All buttons except the STANDBY/ON button on the control panel of the Sub
projector are disabled. Operate the projectors with the control panel of the Main
projector or the remote control.
● Pressing the STANDBY/ON button of the Sub projector does not allow you to
turn off only the Sub projector. The Main and Sub projectors turn off when the
button is pressed for more than 3 seconds. And pressing the button does not
turn on the Main or Sub projector.
● The Main projector is capable of receiving the remote control signals but not the
Sub projector so the remote control should be pointed at the Main projector.
● If a wired remote control is used, connect the cable to the Main projector instead
of the Sub projector.
● For simple PC mouse & keyboard functions, connect both the Main and Sub
projectors to your
simple PC mouse &
● AUTO SEARCH function is disabled when the projector is used in Intellectual
Stack.
● Network communication to Sub and Web Control on Sub cannot turn on the Sub
projector. The Sub projector can only be controlled through the Main projector.
● Remote Control function on Web Control of the Sub
(Network Guide
● If you try to turn on the projectors using the Power on & Display on feature on
the Messenger function, the projectors will exit Intellectual Stack and display the
specified message. To start Intellectual Stack again, re-select MAIN/SUB on
both projectors in the STACK MODE dialog, or turn off and on both projectors
again.
● The Main and Sub
- Muting feature
- Magnifying feature
- ASPECT and OVER SCAN
- COMPUTER IN
- MESSEAGE (Operating Guide
- MY BUTTON
- TEMPLATE (Operating Guide
(continued on next page)
LX41/LW41 User Manual - Instant Stack Guide
computer with USB cables.
keyboard)
→
3.11 Remote
projectors have the following common settings.
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
Control)
→
Temporarily muting the
→
Using the magnify
→
→ INPUT menu)
→ SCREEN menu)
→ OPTION menu)
→ SCREEN menu)
24
→
projector is disabled.
sound)
feature)
IMAGE menu)
020-000509-01 Rev.1 (06-2012)
Using as a