Christie LX41 Manual De Usuario página 27

3.7 Important information for Intellectual Stack
● The following functions are disabled.
- Executing of AUTO KEYSTONE
- STANDBY MODE
- AUTO SEARCH
- Turning on/off AUTO KEYSTONE
- DIRECT POWER ON
- MY SOURCE
- COMMUNICATION TYPE
SERVICE → COMMUNICATION)
● The input source from the following ports cannot be selected.
- USB TYPE A, USB TYPE B, LAN
● When Intellectual Stack is in use, an error message will be displayed if an error
occurs on any of the projectors.
When an error occurs, a full dialog will be displayed
on screen. The full dialog changes to a small dialog
after about 20 seconds without any key activity.
While the small dialog is displayed, pressing the ◄
button displays a full dialog again.
The numbers "1" and "2" above the projector icons represent the
Main and Sub projectors
Refer to the on-screen messages as shown below and take the necessary
actions to resolve the problem.
Example:
Cover Error: Lamp cover is opened.
Lamp Error: Lamp does not light up.
Fan Error: Problem with cooling fan.
Temp Error: Temperature of the projector is too
high.
Air Flow Error: Temperature of the projector is
too high, check that the exhaust vents are not
blocked.
Filter Error: The reading on the filter timer
exceeds the hours set in the FILTER
MESSAGE
OPTION menu
Cold Error: The ambient temperature is too
low.
(continued on next page)
LX41/LW41 User Manual - Instant Stack Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
(Operating Guide
respectively.
menu. (Operating Guide
→ SERVICE)
(continued)
(Operating Guide
→ SETUP
→ OPTION
(Operating Guide
→ OPTION
→ OPTION menu)
→
→
25
STACK menu settings
→
SETUP menu)
menu)
menu)
→ OPTION
menu)
OPTION menu →
Full dialog
020-000509-01 Rev.1 (06-2012)
menu)
Small dialog