Christie DHD800 Guía De Referencia Rápida página 12

Indicators
q
w
e
r
t
y
u
DHD800 Setup Guide
020-000247-02 Rev. 1 (01-2012)
q POWER indicator
This indicator lights green when the projector
is ready to be turned on. And it flashes green in
Power Management mode.
w LAMP Indicator
This indicator is dim when the projector is turned
on. And bright when the projector is in stand-by
mode.
e WARNING TEMP . indicator
This indicator flashes red when internal projector
temperature is too high.
r WARNING FILTER indicator
This indicator does not work in the default state.
When a filter cartridge (supplied) has been
installed in the projector, it works as follows:
– Blink slow when the filter is being scrolled.
– Blink fast when the filter scroll is not working
properly.
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time set
in the timer setting, urging immediate filter/ filter
cartridge replacement.
t SHUTTER indicator
Light blue when the shutter is closed.
y LAMP 1 REPLACE indicator
Turn orange when the life of the projection lamp1
draws to an end.
u LAMP 2 REPLACE indicator
Turn orange when the life of the projection lamp2
draws to an end.
- 10 -