How To Operate The On-Screen Menu - Christie DHD800 Guía De Referencia Rápida

Ocultar thumbs Ver también para DHD800:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 43

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in the owner's manual (CD-ROM).
Press the MENU button on the side control or the
1
remote control to display the On-Screen Menu.
Use the Point
7 8
2
the Point
ed
buttons to select an item in the selected
menu.
3
Press the SELECT button to show the item data. Use
the Point
7 8
buttons to adjust the values.
To close the On-Screen Menu, press the MENU button
again.
Note:
• The selected item is not active until the SELECT
button is pressed.
On-Screen Menu
Menu bar
Pointer (red frame )
Press the Point
to move the pointer.
Item
Operating with Projector Control
Zoom Adjustment
Press the ZOOM button and "Zoom" will be displayed on the screen.
And then press the Point ed buttons to zoom in and out the image.
Focus Adjustment
Press the FOCUS button and "Focus" will be displayed on the
screen. And then press the Point ed buttons to adjust the focus of
the image.
Lens Shift Adjustment
Press the LENS SHIFT button and "Lens shift" will be displayed on
the screen. Use the Point ed7 8 buttons to position the screen to
the desired point without having picture distortion.
The amount of lens shift range varies depending on the lens.
Press and hold the LENS SHIFT button for more than 5 seconds to
return to the central position.
Light Function
Light function is used to turn on the lights on the side control and
around terminals. To turn off the lights, press the Light button again.
Shutter Function
Shutter function allows you to completely block out light to the screen.
Press the SHUTTER button to close the shutter inside the projector. To
open up the shutter, press the SHUTTER button again.
DHD800 Setup Guide
020-000247-02 Rev. 1 (01-2012)
buttons to select a Menu icon. Use
Menu icon
Pointer
(red frame )
ed
buttons
Side Control
Remote Control
Press the
SELECT
button here
to display
previous
items.
SELECT
button
Press the
SELECT
button here
to display
next items.
- 18 -
MENU button
POINT buttons
SELECT button
MENU button
POINT buttons
SELECT button
Item data
Press the Point
buttons to adjust the
value.
Zoom
Focus
7 8

Publicidad

Tabla de contenido
loading

Tabla de contenido