Haverland RCV LCD Manual De Instrucciones página 77

3. OPERATION
3
PARAMETER 3: SOFTWARE VERSION
Indicates the current version of your radiator software.
Step 1:
Access the advanced menu. Using the
buttons select 3.
or
Step 2:
The software version of your radiator
is displayed.
Step 3:
Press the
button to exit the advanced menu.
4
PARAMETER 4: SELECT RADIATOR POWER
For parameter 10 "consumption indicator" to work correctly you must enter the value of the power
of your radiator. The power (watts) is indicated on the gray label located on the right side of the
radiator next to the power cable.
Step 1:
Access the advanced menu. Using
the or
Step 2:
Press the
Step 3:
Press the
select the power of your radiator (for example
1000 W). Press the
Step 4:
Press the
button to exit the advanced menu.
or to select another advanced parameter or press the
buttons select 4.
button to confirm.
or buttons to
button to confirm.
or buttons to select another advanced parameter or press the
EN
Parameter 1
Parameter 1
RCV LCD
77
EN