EdilKamin INPELLET 49 Instalación Uso Y Mantenimiento página 31

N.B.: IMPORTANT FOR INSTALLATION CONDITIONS
METAL FINISHING PROFILE (supplied)
the structure (X - for "frame" coverings or with plasterboard)
NOTES ON FITTING THE COVERING
del of the covering to be used.
Positioning differs according to the model chosen (see as-
tal.
VENTILATION
mands and moving parts are perfectly functional.
ry.
covering assembly, pilaster preparation, painting, etc.,
even where consequent to replacement of any faulty insert
parts.
INSTALLATION
*
Internal mantel
ventilation grilled
*
Recycled air
Y- for "classic" coverings),
-
-
-
-
- 31
*
There must be two ventilation grilles (surfaces greater than
These grilles prevent the accumulation of heat inside, which is
then used to help heat the room of installation.
X
RESISTANT PANELS IN PLASTERBOARD OR
GYPSUM BOARD.
EXCESS TEMPERATURE INSIDE MUST BE PROVI
During the construction phase of the covering it is funda
mental to ensure that the combustion air is restored
to prevent pressure phenomena in the room where the
In addition to the above, always consider the indications gi
tions".
-
Y