Meaning Of Symbols - GRAPHITE 58G495 Manual Del Usuario

• Never use the saw for cutting materials other than wood and
wood-like.
• Do not use the saw without guard or when the guard is blocked.
• Floor close to the machine work place must be kept tidy and
without loose materials and protrusions.
• Provide appropriate work place illumination.
• Machine operator must be properly trained for use, operation and
working with the machine.
• Use only sharp cutting blades.
• Observe maximum speed indicated on the cutting blade.
• Make sure to use parts in accordance with the manufacturer's
instructions.
• Disconnect the saw from power supply when performing
maintenance tasks.
• If the power cord gets damaged during operation, disconnect the
power supply immediately. DO NOT TOUCH POWER CORD BEFORE
DISCONNECTING FROM THE POWER SUPPLY.
• If the saw is equipped with laser, replacement with laser of
another type is forbidden and all repairs must be carried out by
the service. Do not aim the laser beam at people or animals.
• Do not use the tool in stationary mode. It is not designed for use
with sawing table.
• Fix processed material to stable surface and secure with clamps or
vice to eliminate shifting. This kind of work piece fixation is safer
than holding the work piece in hand.
• Wait until blade comes to a complete stop before putting the
power tool away. Cutting blade may jam and cause loss of control
over the power tool.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always a
small risk of injuries at work.
Explanation of used symbols
!
1 2
5 6
9 10
CAUTION! Use precaution measures!
1.
Read instruction manual, observe warnings and safety
2.
conditions therein!
Protection class 2.
3.
Use personal protection measures (protective goggles, earmuff
4.
protectors, anti-dust mask).
Disconnect the charger before repairs.
5.
Use protective clothes.
6.
Protect the tool from moisture.
7.
Keep the tool away from children.
8.
3 4
7 8
15
Caution, risk of hand injuries and cutting fingers.
9.
Danger of kickback.
10.
CONSTRUCTION AND USE
Plunge cut track saw is a hand-held power tool with insulation
class II. The tool is driven by single-phase commutator motor with
rotational speed reduced with gear transmission. When used with
proper equipment it can be used for ripping and cross cutting of
wood, furniture chipboards, panels, plywood and similar wood
based materials. The tool combines functionality of circular saw
and plunge saw, thus allowing to perform plunge cuts to defined
depth in abovementioned materials. Such power tool can be used
for ripping to defined dimensions along straight line thanks to use
of guiding fences.
Range of use covers all areas in renovation tasks. Possibility of
dust-free operation with use of vacuum cleaner allows for easier
operation in already finished rooms.
The tool is designed for cutting and dry operation only. Do not
use the tool with corundum or diamond discs. Use the power
tool in accordance with the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
Dust extraction outlet
1.
Main handle
2.
Auxiliary handle
3.
Cross cut line indicator
4.
Mitre cut indicator
5.
Guard cut out
6.
Cutting blade
7.
Cutting blade guard
8.
Lock lever
9.
Lock button
10.
Switch
11.
Spindle lock button
12.
Power indicator
13.
Knob for base position adjustment
14.
Wheel for rotational speed control
15.
Base
16.
Angle indicator
17.
Angular scale
18.
Cutting depth gauge knob
19.
Cutting depth scale
20.
A, B cutting depth gauge
21.
Rail precision adjustment knobs
22.
Guide rail track
23.
Anti slip foam
24.
Edge rubber
25.
Slide strip
26.
Connecting rod
27.
Fixing groove
28.
Pressing screws
29.
Fixing clamp
30.
Guiding groove
31.
Fixing bolt for cutting blade
32.
* Differences may appear between the product and drawing.

MEANING OF SYMBOLS

CAUTION
WARNING