Starting The Memory Function; Electronic Clock; Clock Display; Timer - NEFF C54L60W0 Instrucciones De Uso

Press and hold the l button for a few seconds.
5.
A signal sounds. The setting is saved and can be started at any
time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Note: The programmes which have been set remain stored
even if there is a power cut.
Note: You can also store the series of operations option.

Starting the memory function

You can start cooking at any time using the settings saved for
your dish.
Press the main switch.
1.
The symbol lights up. Your appliance is ready for use.
~
Press and hold the l button for a few seconds.
2.
Select "M1" or "M2" using the programme selector.
3.
Press the ... button.
4.

Electronic clock

Your appliance has various clock functions.
In this section, the following are explained:
The clock display
■
how to set the timer
■
how your appliance is automatically switched off (cooking
■
time)
how to set or change the clock.
■

Clock display

&ORFN IXQFWLRQ EXWWRQ
Clock function Use

Timer

You can use the timer as an egg timer or
Q
a kitchen timer. The appliance does not
switch on or off automatically

Cooking time

The appliance switches off automatically
x
after a set cooking time
(e.g.
Clock Setting the clock
3
Notes
Between the times :
ƒƒ ‹‹
■
dimmed if you do not make any settings in that period or no
clock function is activated.
When the Timer and Cooking time
Q
■
in use, a signal sounds after the settings have elapsed and
the corresponding symbol flashes. To stop the audible signal
before it finishes, press the clock function
24
5RWDU\ VHOHFWRU
x
: hours)
‚ „‹
and : the clock display is
† †Š
clock functions are
x
button
ÁÀ
The memory function starts. The
in the display.
Note: Once operation has started, you can no longer change
the memory location.
Note: Saved settings are retained even after a power cut.
The cooking time has elapsed
A signal sounds. The memory function has finished. You can
stop the audible signal early by pressing the
button. Press the main switch to switch off the appliance, or
make new settings.
Pausing operation
Press the button or open the appliance door. Operation is
...
suspended. After closing the door, press the
Operation continues.
Cancelling the setting
Press and hold the button for a few seconds. The setting is
...
cancelled. Make new settings or switch the appliance off at the
main switch.
If you wish to cancel a setting, turn the set time back to
■
and switch the appliance off.
The setting can be corrected using the rotary selector if
■
necessary.
Switching the clock display on and off
Press and hold the clock function button
1.
seconds.
The clock display is switched off. If a clock function is active,
the associated symbol remains illuminated.
Press and hold the clock function button
2.
seconds.
The clock display switches on.
Timer
Press the clock function button repeatedly until the
KJ
1.
and Q symbols light up.
Set the duration using the rotary selector (e.g.
2.
The setting is applied automatically. Then the clock is
displayed again and the minute minder starts counting down.
Cooking time
Automatic switch-off after a cooking time setting has elapsed.
Set the grill or a microwave power setting.
1.
Press the clock function button until the
2.
light up.
x cooking time counts down
clock function
ON
... button again.
‹
ÁÀ for a few
for a few
ÁÀ
KJ
† : ‹‹ minutes).
and symbols
KJ x
: ‹‹