Set the cooking time using the rotary selector.
3.
(e.g.
:
hours).
‚
„‹
The setting is applied automatically
Press the
button.
...
4.
The set cooking time counts down.
The cooking time has elapsed
A signal sounds. The appliance stops heating. The display
shows 0:00. You can cancel the audible signal before it has
finished by pressing the
ÁÀ
Changing the cooking time
Change the cooking time using the rotary selector.
Cancelling the cooking time
Using the rotary selector, turn the cooking time back to 0:00.
The change is applied after a few seconds. The cooking time
has been cancelled.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic setting
Audible signal duration:
™‚
= short = 10 seconds
‚
Button tone:
™ƒ
‚
= on
Press the main switch. The appliance is ready for operation and
the
symbol lights up.
~
Press and hold the
button for a few seconds.
o
1.
The first basic setting appears on the clock display.
Press the
button repeatedly until the required basic setting
o
2.
is shown.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
button.
Options
Audible signal duration:
= medium = 2 minutes
ƒ
= long = 5 minutes
„
Button tone:
ƒ
= off
Checking time settings
If several time-setting options have been set, the corresponding
symbols appear in the display. The
foreground in front of the time function symbol.
To check the kitchen timer
time
, press the
button repeatedly until the
0
ÁÀ
is in front of the appropriate time function. The relevant value
will appear for a few seconds in the clock display.
Setting the clock
You can only change the clock when no other clock function is
active.
Press the clock function
1.
and
symbols light up.
3
Turn the rotary selector to set the time of day.
2.
Press the
clock function button.
KJ
3.
Your setting is applied.
Changing the clock
e.g. from British Summer Time to Greenwich Mean Time.
Make the settings as described in steps 1 and 2.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Explanation
Signal after the cooking time has elapsed
Confirmation tone when a button is pressed
Make the desired setting using the programme selector.
3.
Finally, press and hold the
4.
All settings are applied.
You can change the settings at any time.
:
Risk of electric shock!
Penetrating moisture may cause an electric shock. Do not use
any high-pressure cleaners or steam cleaners.
symbol is in the
KJ
, cooking time
or clock
V
x
KJ
button repeatedly until the
KJ
button for a few seconds.
o
symbol
KJ
25