Disable The Timeout Lock Mode In User Mode; Determine The Dt2000 Version Number In User Mode - Kingston DataTraveler 2000 Manual De Instrucciones

Disable the Timeout Lock Mode in User Mode

To disable the Timeout Lock, follow the steps in the table below.
Only do these steps when DT2000 is disconnected from a Host system.
Note:
Instructions
1. Unlock the DT2000 with the User
PIN
2. Enable Options by pressing the
KEY 3 times (triple-click)
3. Within 10 seconds, enter the
number 8 (tuv) followed by the
number 5 (jkl) button - (85)
4. Press KEY button once
5. Within 10 seconds, enter the
number 0 button twice (double-click)
(zero zero) – (00)
6. Press the KEY button once

Determine the DT2000 Version Number in User Mode

To determine the DT2000 Version Number, follow the steps in the table below.
Instructions
1. Unlock the DT2000 with the User
PIN
2. Enable Options by pressing the
KEY button 3 times (triple-click)
3. Within 10 seconds, enter the
number 8 (tuv) followed by the
number 6 (mno) button - (86)
4. Press KEY button once
For example, if the revision is number '1.11', the
blink eight (11) times. When the sequence has ended, the Red,
together once and then the
Document No. 480ADT2000.B00
LED
LED
will be solid.
Green
LED Status
solid LED changes to
Red
indicating successful User PIN entry
and
Green Blue
awaiting new instructions in OPTIONS
Mode
and
Green Blue
together
Blinking
Green
LED continues to blink
Green
solid LED changing to
RED
Timeout Lock has been disabled
LED Status
solid LED changes to
Red
indicating successful User PIN entry
and
Green Blue
new instructions in OPTIONS Mode
and
Green Blue
together
&
Red, Green
together once followed by the
to the first significant digit of the revision, then
the LED will blink according to the
Green
second significant digit of the revision number
LED will blink once (1) and the
Red
Green
DT2000
solid LED
Green
LEDs blink together –
LEDs continue to blink
LED
solid LED -
Green
solid LED
Green
LEDs blink together – awaiting
LEDs continue to blink
LEDs will quickly blink
Blue
LED blinking
Red
LED will
Green
and LEDs will blink
Blue
Page 13 of 30