Determine The Device Version Number In Admin Mode - Kingston DataTraveler 2000 Manual De Instrucciones

Determine the Device Version Number in Admin Mode

To display the device version number of the DT2000, refer to the table below.
Entering the Admin PIN to access a locked drive will clear the User PIN. For security
Caution:
reasons, we highly recommend that a new User PIN be created immediately once the drive
has been unlocked using the Admin PIN. Refer to
Instructions
1. Unlock the DT2000 with Admin PIN
2. Press the KEY button three times
(triple-click)
3. Within 10 seconds begin to press the
number 8 (tuV) button followed by
the number 6 (mNo) button (86)
4. Press KEY button once
For example, if the revision number is '1.11', the
eleven (11) times. Once the sequence has ended the Red,
then to flickering
Green
Document No. 480ADT2000.B00
LED
LED.
Creating a New User PIN in Admin
LED State
solid LED followed by a flickering
Red
LED indicating successful Admin PIN entry
and
Green Blue
and
Green Blue
&
Red, Green Blue
together once followed by the
to the most significant digit of revision and the
LED will blink according to the least
Green
significant digit of the revision number
Red LED will blink once (1) and the
&
Green Blue
DT2000
Mode.
Green
LEDs flicker together
LEDs continue to flicker together
LEDs will quickly blink
Red LED blinking
LED will blink
Green
LEDs will blink together once and
Page 20 of 30