Disable The Timeout Lock In Admin Mode - Kingston DataTraveler 2000 Manual De Instrucciones

Disable the Timeout Lock in Admin Mode

To disable the Timeout Lock, please follow steps in the table below.
Only do these steps when DT2000 is disconnected from a Host system.
Note:
Entering the Admin PIN to access a locked drive will clear the User PIN. For security
Caution:
reasons, we highly recommend that a new User PIN be created immediately once the drive
has been unlocked using the Admin PIN. Refer to
Instructions
1. Unlock the DT2000 with Admin PIN
2. Enable Options by pressing the KEY
button 3 times (triple-click)
3. Within 10 seconds begin to Press
button number 8 (Tuv) followed by
the number 5 (jkL) button - (85)
4. Press KEY button once
5. Within 10 seconds begin to press the
number 0 button twice (zero,zero)-
(00)
6. Press the Key button once
Document No. 480ADT2000.B00
LED
Creating a New User PIN in Admin
LED State
solid LED followed by a flickering
Red
LED indicating successful Admin PIN entry
and LEDs flickering together
Green Blue
awaiting new instructions in OPTIONS mode.
and LEDs continue to flicker together
Green Blue
Blinking LED
Green
LED continues to blink
Green
solid LED changing to flickering
Red
Timeout Lock has been disabled
DT2000
Mode.
Green
LED.
Green
Page 22 of 30