SMA SUNNY HIGHPOWER PEAK3 Manual De Instrucciones página 11

SMA Solar Technology AG
Symbol Explanation
Beware of hot surface
The product can get hot during operation.
Observe the documentation
Observe all documentation supplied with the product.
Inverter
Together with the green LED, this symbol indicates the operating state of the in-
verter.
Observe the documentation
Together with the red LED, this symbol indicates an error.
Data transmission
Together with the blue LED, this symbol indicates the status of the network con-
nection.
Three-phase alternating current without neutral conductor
Direct current
The product has no galvanic isolation.
WEEE designation
Do not dispose of the product together with the household waste but in accor-
dance with the disposal regulations for electronic waste applicable at the in-
stallation site.
The product is suitable for outdoor installation.
Degree of protection IP65
The product is protected against the penetration of dust and water that is di-
rected as a jet against the enclosure from all directions.
CE marking
The product complies with the requirements of the applicable EU directives.
RoHS labeling
RoHS
The product complies with the requirements of the applicable EU directives.
Quick Reference Guide
3 Symbols on the Product
SHPxxx-20-IS-xx-13 11