Product Description - Swan Analytical Instruments Cleaning Module-II Instrucciones De Instalación

Cleaning Module-II

Product Description

1. Product Description
The Cleaning Module-II can be used together with the following
monitors:
Usually two cleaning solutions are used: In a first step, an acid is in-
jected into the flow cell to remove lime. In a second step, a disinfec-
tant is injected.
Alternatively, operation with only one cleaning solution is possible.
Requirements Version 1-D of the Cleaning Module-II requires that the following
firmware version is installed on the monitor:
6
 AMI Codes-II
 AMI Codes-II CC
 AMI Codes-II TC
 AMI Phosphate-II
 AMI Phosphate HL
 AMI SAC254
 AMI Codes-II: V6.22 or higher
 AMI Codes-II CC: V6.23 or higher
 AMI Codes-II TC: V6.21 or higher
 AMI Phosphate-II: V6.21 or higher
 AMI Phosphate HL: V6.22 or higher
 AMI SAC254: V6.22 or higher
A-96.250.599 / 020620