Step 4: Setting The Scsi Id For Your Drive - IBM OPTIONS SCSI Manual Del Usuario

Step 4: Setting the SCSI ID for your drive

Set the SCSI ID for your drive by placing the jumpers included in your option
package on the appropriate drive jumper pins. See your SCSI Hard Disk Drive
User's Guide Supplement and the following diagram for information on SCSI ID
jumper placement.
Note: The alignment of the jumper pins on the diagram might be the reverse
of the alignment of the jumper pins on your drive. Be sure to use the
SCSI Hard Disk Drive User's Guide Supplement to confirm the correct
jumper placement.
1-6
SCSI Hard Disk Drives for IBM PCs: User's Guide
Binary Weight 1 2 4 8
SCSI ID = 0
SCSI ID = 1
SCSI ID = 2
SCSI ID = 3
SCSI ID = 4
SCSI ID = 5
SCSI ID = 6
SCSI ID = 7
SCSI ID = 8
SCSI ID = 9
SCSI ID = 10
SCSI ID = 11
SCSI ID = 12
SCSI ID = 13
SCSI ID = 14
SCSI ID = 15
Reserved for Primary
Hard Disk Drive
Reserved for Adapter