Installing An Optional Flash Memory Or Firmware Card - Lexmark C510 Manual De Instrucciones

Latch
Installing an optional flash memory
or firmware card
Note:
Firmware cards offered for other Lexmark printers
cannot be used with your printer.
Warning:
Firmware cards are easily damaged by static
electricity. Touch something metal on the printer before
you touch a card.
Plastic pins
Notch
Metal pins
Install memory, firmware, or option cards
4
Push the memory card straight
into the connector until it snaps
into place. Make sure each latch
fits over the notch located on either
side of the memory card.
Follow the instructions in this section to
install flash memory or a firmware card.
The system board has two connection
locations where you can install a total of
one flash memory card and one firmware
card.
1
Unpack the flash memory or
firmware card.
Avoid touching the metal pins on
the bottom of the card. Save the
packaging.
25