Lexmark C510 Manual De Instrucciones página 44

Using Windows 2000
with USB or
parallel cable
Note:
You need
administrative access to
install printer drivers on your
computer.
Using Windows Me
with USB or
parallel cable
Note:
Depending on the
software and printers
already installed on your
computer, your screens may
vary from those in the
instructions.
When the Found New Hardware Wizard screen appears:
1
Insert the drivers CD. If the CD auto launches, exit the CD. Click
Next.
2
Select Search for a suitable driver, and then click Next.
3
Select only Specify a location, and then click Next.
4
Browse to the location of the printer driver on the drivers CD:
D:\Drivers\Win_2000\
5
Click Open, and then click OK.
6
Click Next to install the driver that is displayed.
If a message appears regarding the driver not being digitally
signed, it is okay to disregard this message.
7
Click Finish when the software is installed.
8
Print a test page to verify printer setup.
You must install both a USB port driver and an enhanced custom print
driver.
When the Found New Hardware Wizard screen appears:
1
Insert the drivers CD. If the CD auto launches, exit the CD. Click
Next.
2
Select Automatic search for the best driver (recommended),
and then click Next. The wizard searches for a USB port driver.
The name of it will be similar to your printer name.
3
After the USB port driver is found, click Finish.
4
Select Automatic search for the best driver (recommended),
and then click Next. The wizard now searches for a printer
driver.
5
Select your printer and driver from the list, and then click OK.
Make sure you select the driver in the correct language you
want to use.
D:\Drivers\WIN_9X\<LANGUAGE>
6
After the printer driver is installed, click Finish.
Install drivers for local printing
38