Attaching A Network Cable - Lexmark C510 Manual De Instrucciones

Attaching a
network cable
Ethernet
Use Category 5 cable with an RJ-45
connector for the standard network
port.
802.11b wireless
options
You can attach your printer to a network using standard network
cables.
A 10BaseT/100BaseTX Fast Ethernet port is standard on the network
model.
To attach the printer to a network:
1
Make sure the printer is turned off and unplugged.
2
Plug one end of the standard network cable into a LAN drop or
hub and the other end into the Ethernet port on the back of the
printer. The printer automatically adjusts for the network speed.
Your printer can be converted to wireless networking by using an
optional 802.11b Wireless Print Adapter. This adapter is a piece of
hardware that plugs into the Ethernet port on your printer.
If you purchased this adapter for your printer, refer to the
documentation that shipped with the adapter for installation and
configuration.
Attach cables
34