Publicidad
ASSEMBLING AND INSTALLING THE RELEASABLE SHAFT ASSEMBLY - ASSEMBLAGGIO ED INSTALLAZIONE GRUPPO ALBERO
DISINNESTABILE - ABZIEHBARES WELLENAGGREGAT ZUSAMMENBAUEN UND INSTALLIEREN - ASEMBLAJE Y INSTALACION GRUPO EJE
31
26
GB
Assemble the coupling assembly (25) complete with sleeve (26).
NOTE. To hold balls (30) in their seats, fill the slots in shaft (31) with
grease.
GB
Only if previously removed. Fit the snap ring (24).
21
GB
Lock the flange (21) using screws (23) coated with Loctite 510.
Tighten screws (23) using the alternate method to a torque of 86±
89 Nm.
DESCONECTABLE - ASSEMBLAGE ET INSTALLATION GROUPE ARBRE DEBRAYABLE
27
30
DNF00841
a
24
DNF00820
c
23
DNF00920
e
56
5
GB
Introduce the entire coupling assembly (25) in the support (5) and
make it rest against the bearing (29).
NOTE. If necessary, use a plastic hammer.
GB
Apply Loctite 510 to the surface of reduction gear (22). Install
flange (21) and position it so the marks made during disassembly
match up.
19
20
GB
Grease and insert needle cage (20) in pinion (19).
25
29
DNF00900
b
22
21
DNF00910
d
DNF00801
f
Publicidad
