Setting The Optimum Ph Value - JBL ProFlora Manual De Instrucciones

1 The direct way to enter the optimum pH value.
2 Status line, alternating display shows: auto pH on/off, alarm limit value, hysteresis
3 Actual pH value (current pH value in buffer or in your aquarium)
4 Current temperature (in buffer or in your aquarium)
5 Valve status (in display Automatic and Valve on fl ow)
6 Sensor voltage
7 Time to calibration (days/hours)
8 Actual precision of measurement (re-calculated for each calibration)
9 Key lock (unlocked in illustration)
10 Optimum pH value (required pH value, controlled by device through CO
11 Alarm status (in illustration "only fl ashing")

(6) Setting the optimum pH value

By pressing only one key, you navigate from the main display page directly to the
setting option for the optimum pH value:
Press the OK key (Start). The actual pH
value appears and the optimum pH value
fl ashes. Change the optimum value using
the selection keys and confi rm by pressing
the OK key.
To check that no incorrect optimum values
have been entered which could endanger
the fi sh, Item 7 should be read without
fail, before any optimum value below pH
7.00 is set. Optimum values above 7.00
are always harmless for fi sh.
– 36 –
D
GB
F
NL
I
µ
DK
¸
E
P
supply)
2