Publicidad
Idiomas disponibles
Idiomas disponibles
iNTENDED uSE OF ThiS POwEr TOOL
Symbol
Description
wArNiNg: This product is a Steel Cutting
V
Volts
Hand Held Circular Saw and has been
designed to be used with special Evolution
blades. Only use blades designed for use in
A
Amperes
this machine and/or those recommended
specifically by Evolution Power Tools Ltd.
Hz
Hertz
When fitted with an appropriate blade this
machine can be used to cut:
Min
-1
Speed
Mild Steel
Aluminium
~
Alternating Current
Lumber (blade change recommended)
PrOhiBiTED uSE OF ThiS POwEr TOOL
n o
No Load Speed
wArNiNg: This product is a Steel Cutting
Hand Held Circular Saw and must only be
Wear Safety Goggles
used as such. It must not be modified in any
way, or used to power any other equipment or
drive any other accessories other than those
Wear Ear Protection
mentioned in this Instruction Manual.
wArNiNg: This machine is not intended
Wear Dust Protection
for use by persons (including children) with
reduced physical, sensory or mental capabilities.
Read Instructions
If the user has a lack of experience and
knowledge, this person must be given
supervision and instruction concerning the safe
CE Certification
use of the machine by a person responsible for
their safety and who is competent in its safe use.
CSA Certification
Children should be supervised to ensure
that they do not have access to, and are not
allowed to play with this machine.
Waste Electrical &
Electronic Equipment
Triman - Waste Collection
& Recycling
Warning
8
www.evolutionpowertools.com
www.evolutionpowertools.com
ELECTriCAL SAFETy
This machine is fitted with the correct
moulded plug and mains lead for the
designated market. If the mains lead or the
plug are damaged in any way, they must be
replaced with original replacement parts by a
competent technician.
OuTDOOr uSE
wArNiNg: For your protection, if this tool
is to be used outdoors it should not be
exposed to rain, or used in damp locations.
Do not place the tool on damp surfaces.
Use a clean, dry workbench if available. For
added protection use a residual current
device (R.C.D.) that will interrupt the supply
if the leakage current to earth exceeds 30mA
for 30ms. Always check the operation of the
residual current device (R.C.D.) before using
the machine.
If an extension cable is required it must be a
suitable type for use outdoors and so labelled.
The manufacturers' instructions should be
followed when using an extension cable.
POwEr TOOL gENErAL
SAFETy iNSTruCTiONS
(These General Power Tool Safety Instructions
are as specified in BS EN 60745-1:2009
& EN 61029-1:2009).
wArNiNg: Read all safety warnings and
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/ or serious injury.
Save all warnings and instructions for
future reference. The term "power tool" in
the warnings refers to your mains-operated
(corded) power tool or battery-operated
(cordless) power tool.
9
1) general Power Tool Safety warnings
[work area safety]
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away
while operating power tool. Distractions
can cause you to lose control.
2) general Power Tool Safety warnings
[Electrical Safety]
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
b) Avoid body contact with earthed
or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) when operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) if operating a power tool in a damp location
is unavoidable, use a residual current device
(rCD) protected supply. Use of an RCD reduces
the risk of electric shock.
EN
ES
FR
TR
Publicidad
