Elcometer 266 Manual Del Usuario página 10

5 GETTING STARTED (continued)
5.2 SWITCHING THE INSTRUMENT ON / OFF
To switch on/off: Press the On/Off button '
Note: To extend battery life (time between charges) the instrument can be set to
switch off automatically after a user defined period of inactivity between 1 and
15 minutes. The default setting is 15 minutes.
5.3 SELECTING YOUR LANGUAGE
1 Press the MENU key to display the main menu.
When the instrument is switched on for the first time after despatch from the

Elcometer factory, the language selection screen will be displayed. Proceed
to Step 2.
2 Select your language using the
3 Press SEL to activate the selected language.
To access the language menu when in a foreign language:
1 Switch the instrument OFF.
2 Press and hold the left hand key and switch the instrument ON.
The display will show the language selection screen with the
current language highlighted by the cursor.
3 Select your language using the
4 Press SEL to activate the selected language.
5.4 CONFIGURING THE INSTRUMENT
1 Press the MENU key to display the main menu.
 
2 Use the
3 Press SEL to activate the selected option or access the sub-
menu, see Table 1.
4 Press BACK or ESC to leave the main menu or any sub-menu.
Option
BACKLIGHT
BEEP VOLUME
UNITS
LANGUAGES
en-9
R
keys to scroll up and down the menu items.
Action Required
Press SEL to toggle the display backlight on or off.
Press SEL followed by
1 (minimum) to 5 (maximum). Press OK when finished.
Press SEL followed by
units;
µm, mm, mil, thou or inch. Press OK when nished.
Press SEL followed by
Press OK when finished.
'.
 
keys.
 
keys.
TABLE 1

or to set the beep volume;



or to select the measurement


or to select the display language.

www.elcometer.com