High Voltage Probe Handle - Elcometer 266 Manual Del Usuario

5 GETTING STARTED (continued)
5.6 VOLTAGE AND SENSITIVITY LOCKS
The voltage and sensitivity settings on the Elcometer 266 include a
'lock' feature which helps to prevent accidental changes to these
values once they have been set.
The voltage lock can be toggled on or off from the main menu,

see Section 5.4 'Configuring the Instrument' on page en-9. The
voltage lock also switches on automatically once the voltage has
been set using CALC.
The sensitivity lock can be toggled on or off from the main menu,

see Section 5.4 'Configuring the Instrument' on page en-9.
If a voltage or sensitivity lock is switched on, it can be overidden during
setting of the value by pressing the UNLOCK key. The lock will re-
engage automatically once the value has been set.

6 HIGH VOLTAGE PROBE HANDLE

A range of interchangeable high voltage probe
handles is available for the Elcometer 266. A label
on the underside of the handle indicates the
maximum working voltage of the handle
(5 kV, 15 kV or 30 kV).
The choice of which high voltage probe handle to use depends upon
the maximum test voltage required, which in turn depends upon the
thickness of the coating being tested and the recommendations of any
test standard which may be being followed.
The Elcometer 266 is not supplied with a probe handle, these must be
ordered separately.
Description
Elcometer 266 Probe Handle, DC5
Elcometer 266 Probe Handle, DC15
Elcometer 266 Probe Handle, DC30
Elcometer 266 Probe Handle, DC30S
(Continuous Voltage)
Note: The DC30S Continuous Voltage Probe Handle is compatible with Elcometer 266
instruments with serial numbers 'SC16119' onwards. The software in older
instruments must be updated by Elcometer or your local Elcometer distributor to
recognise the new DC30S handle.
en-11
R
Voltage Part Number
0.5 - 5 kV T26620033-1
0.5 - 15 kV T26620033-2
0.5 - 30 kV T26620033-3
0.5 - 30 kV T26620033-4
www.elcometer.com