Mopar 82213752AB Instrucciones De Montaje página 11

37. Route the remaining supplied body
harness (C) to the body grommet on
driver side bulkhead.
38. Cut the end off the dash panel grommet
nipple (1) hanging off the bottom side of
the body harness near the brake
booster.
39. Route the backup camera harness
through the dash panel grommet nipple.
40. Apply Mopar RTV 82300234 around
the grommet nipple.
41. Continue to route the supplied body
harness (C) to the driver kick panel
area.
42. Insert wires into supplied connector
(taped to harness in polybag) as listed
below:
• Cavity A – GRY/BLU
• Cavity B – YEL
• Cavity C – GRN
• Cavity D – GRY/ORG
• Cavity E – Bare
• Cavity F – BLU
March 5, 2014
www.mopar.com
11
K6861692AB