NOTE: Connector C5 front view is
shown.
45. Insert the purple wire from supplied
body harness (C) into connector C5,
cavity 45. If the cavity is already
populated, cut the terminal off the purple
wire and splice the purple wire to the
ORG/DB wire in cavity 45 (splice
and solder new wire to the original wire
using the soldering procedure in steps
31 thru 34).
46. Assemble connector C5 and insert the
connector back into the BCM.
47. Release and remove connector C7 (1)
from the BCM.
March 5, 2014
www.mopar.com
13
K6861692AB