Mopar 82213752AB Instrucciones De Montaje página 14

14
48. Remove housing (1) to gain access to
the terminal block (2) of connector C7.
NOTE: Connector C7 front view
shown.
49. Insert yellow wire from supplied body
harness (C) into connector C7, cavity 6.
If the cavity is already populated, cut
the terminal off the yellow wire and
splice the yellow wire to the ORG/VT
wire in cavity 6 (splice and solder new
wire to the original wire using the
soldering procedure in steps 31 thru 34).
50. Assemble connector C7 and insert the
connector back into the BCM.
51. Secure body harness to existing BCM
harness with supplied tie straps.
March 5, 2014
www.mopar.com
K6861692AB