Publicidad
Idiomas disponibles
Idiomas disponibles
6
NOTE: If the vehicle is equipped with
the tailgate lock actuator, you
must remove and transfer
the two wires from the
existing body side tailgate
connector to the supplied
body harness (C) connector.
See graphic for more
information.
18. If equipped with the tailgate lock
actuator, remove the wires (1, 2)
from the existing tailgate connector (3),
then discard the existing tailgate
connector.
19. Remove the terminal plugs from cavities
7 and 8 in the supplied body harness
connector (C).
20. Transfer circuit P237 (DG/TN) wire
removed from cavity 7 of the original
connector and transfer into cavity 7 of
the supplied harness connector.
21. Transfer circuit P235 (LG/TN) wire
removed from cavity 8 of the original
connector and transfer into cavity 8 of
the supplied harness connector.
March 5, 2014
www.mopar.com
K6861692AB
Publicidad
