Step 5 (Wipe Out Inside Of Dryer); Step 6 (Plug In The Dryer); Step 7 (Check Installation) - Alliance Laundry Systems LES33A Instrucciones De Instalación

Step 5:
Wipe Out Inside Of Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
Step 6:
Plug in the Dryer
Refer to Section on Electrical Requirements, and
connect the dryer to an electrical power source.
Connect to 30 Amp circuit.
Step 7:
Check Installation
Refer to Installer Check on the back cover of this
manual and make sure that dryer is installed correctly.
8
D275IE0C
ELECTRIC
GAS
Plug cord into separately fused
15 Amp circuit.
D327IE2A
D254IE0B
504607