Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
User-Maintenance Instructions . . .
Lubrication
All moving parts are sealed in a permanent supply of
lubricant or are equipped with oilless bearings.
Additional lubrication will not be necessary.
Care of Your Dryer
Clean the lint filter after drying each load. The lint filter
may be washed if needed. Occasionally remove lint
filter and vacuum the area under it.
Ordinarily, the dryer cylinder will need no care.
Wipe the dryer cabinet as needed. If detergent, bleach
or other washing products have been spilled on the
dryer, wipe immediately. Some products will cause
permanent damage if spilled on the cabinet.
Do not allow sharp or rough objects to lean against the
dryer. The finish could be damaged.
Use only a damp or sudsy cloth for cleaning the control
panel. Some spray prewash products may harm the
finish on the control panel.
NOTE: The wiring diagram is located inside the
control panel.
CAUTION
Label all wires prior to disconnection when
servicing controls. Wiring errors can cause
improper and dangerous operation.
504607
Exhaust System
The exhaust duct should be inspected after one year of
use and cleaned if necessary. Inspect and clean exhaust
duct every one to two years as required thereafter.
The weather hood should be checked frequently to
make sure the dampers move freely, dampers are not
pushed in and that nothing has been set against them.
Keep dryer area clear and free from combustible
materials, gasoline and other flammable vapors and
liquids.
Do not obstruct the flow of combustion and ventilation
air.
NOTE: Verify proper operation after servicing.
W049
21
Publicidad
Capítulos
Tabla de contenido
