Alliance Laundry Systems LES33A Instrucciones De Instalación página 16

Four-Wire Plug
1. Remove access cover
from rear of dryer.
2. Remove ground screw and
save for use in Step 4.
Remove wire and use in
Step 5.
3. Use a strain relief
and insert end of
power cord
through power
supply hole.
14
D284IE0C
GROUND
SCREW
D287IE0E
POWER
CORD
GROUND
WIRE
D288IE0D
4. Attach power cord ground (green) wire to rear
bulkhead using ground screw removed in Step 2.
NEUTRAL
TERMINAL
RED
GREEN
5. Use the three screws from the envelope located
in the cylinder to attach the remaining power
cord wires to the terminal block as follows:
a. Red wire to "L1" terminal.
b. Black wire to "L2" terminal.
c. White wire to Neutral terminal.
NOTE: When installing the white wire, loop the
free eyelet end of the ground wire (removed in Step
2) and attach along with the white wire to the
neutral (center) terminal on the terminal block.
6. Tighten all screws and reinstall access cover
removed in Step 1.
WHITE
BLACK
D289IE0C
504607