Instructions For Installation; Reminders For The Installer; Reference Standards And Laws; Unpacking - Gastrodomus LM8T43 Instalación, Uso, Mantenimiento

APPLIANCE
The appliance is manufactured 90% from recyclable
metals (stainless steel, aluminium sheet, copper.. .. ).
The appliance must be scrapped in compliance with
current regulations governing such disposal.
Make the appliance unusable before scrapping.
It must be disposed of properly.
THE SYMBOL SHOWING A CROSSED-OUT
WASTE CONTAINER ON THE UNIT OR
PACKAGE INDICATES THAT, AT THE END
OF ITS LIFE CYCLE, THE PRODUCT MUST BE
COLLECTED SEPARATE FROM OTHER
WASTE.
SEPARATE COLLECTION OF THIS UNIT AT THE END OF
ITS LIFE CYCLE IS
MANUFACTURER.
THE USER WHO INTENDS TO GET RID OF THIS
EQUIPMENT SHALL CONTACT THE PRODUCER AND
FOLLOW THE SYSTEM THAT THE LATTER HAS USED
IN ORDER TO COLLECT THE EQUIPMENT SEPARATELY
AT THE END OF ITS LIFE.
PROPER SEPARATE COLLECTION
POSSIBLE NEGATIVE
ENVIRONMENT AND HEALTH, AND FAVOURS THE
REUSE AND/OR RECYCLING
MATERIALS.
THE UNAUTHORISED DISPOSAL OF THE PRODUCT BY
THE HOLDER IMPLIES APPLYING ADMINISTRATIVE
PENALTIES PROVIDED BY THE REGULATIONS IN
FORCE.
INSTRUCTIONS FOR
II.
INSTALLATION

2. REMINDERS FOR THE INSTALLER

READ THIS MANUAL CAREFULLY. IT
PROVIDES IMPORTANT INFORMATION
FOR SAFE INSTALLATION, USE AND
MAINTENANCE OF THE APPLIANCE.
FAILURE TO COMPLY WITH WHAT IS
PRESENTED BELOW MAY COMPROMISE
THE SAFETY OF THE EQUIPMENT.
THE MANUFACTURER WILL NOT BE LIABLE
FOR ANY DAMAGE OR INJURY RESULTING
FROM FAILURE TO OBSERVING THE
FOLLOWING RULES.
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-ventilated
MANAGED BY THE
HELPS PREVENT
IMPACTS ON THE
OF THE UNIT'S
room.
Installation and conversion to a different type of gas
must be carried out by qualified technicians
authorized by the manufacturer, in compliance with
current safety standards and the instructions in this
manual.
Appliance maintenance and conversion to a different
type of gas must be carried out by qualified
technicians authorized by the manufacturer, in
compliance with current safety standards and the
instructions in this manual.
Do not obstruct any air vents or drains present on the
appliance.
Do not tamper with appliance components.
3. REFERENCE STANDARDS AND
LAWS
Install the appliance in accordance with the safety
standards in force in the country.

4. UNPACKING

Check the state of the packing and in the event of
damage, ask the delivery person to inspect the goods.
Remove the packing.
Remove the protective film from the outer panels.
Use a suitable solvent to remove any residual
adhesive from the panels.

5. POSITIONING

The overall dimensions of the appliance and the
position of connections are given on the installation
diagram at the end of this manual.
The appliance can be installed singly or in
combination with other appliances in the same
product range.
The appliance is not suitable for integrated
installation.
Position the appliance at least 10 cm from adjacent
walls.
If the appliance is to be be placed near walls, dividers,
kitchen furniture, decorative elements etc. this must
be made of non-combustible materials
Otherwise, they must be covered with suitable non-
combustible heat insulating materials.
Level the appliance by means of the height-adjustable
feet
12