Sanyo SPWXDR124GH56A Manual Del Usuario página 18

Installation space
For 4, 5 and 6 HP Outdoor Unit
Install the outdoor unit with a sufficient space around
the outdoor unit for operation and maintenance.
(1) Obstructions on the left side, right side and rear
GB
side (Front side and above the unit are opened).
(Fig. 2-5)
FR
DE
IT
* Necessary space is required to unscrew on the
PT
rear side for maintenance and if a sufficient
maintenance space is provided on the rear side
(40 cm), the space of over 15 cm is enough at the
right side.
GR
(2) Obstructions on the front side and rear side (Left
side, right side and above the unit are opened).
(Fig. 2-6)
ES
* For compressor replacement, 50 cm or more is
required on the front side even when using the air
discharge chamber.
DC̲Inverter̲Eng.indd 18 DC̲Inverter̲Eng.indd 18
Fig. 2-5
Fig. 2-6
(3) Obstructions on the front side and above the unit
(Left side, right side and rear side are opened).
(Fig. 2-7)
Fig. 2-7
In case of multiple installations
● Provide a solid base (concrete block, 10 × 40 cm
beams or equal), a minimum of 15 cm above ground
level to reduce humidity and protect the unit against
possible water damage and decreased service life.
(Fig. 2-8)
●
Use lug bolts or equal to bolt down unit, reducing
vibration and noise.
Air intake
Air
discharge
Air
discharge
Anchor bolts
(4 pieces)
Fig. 2-8
18
c m
e
o r
3 0
m
o r
Air intake
Min. 15 cm
2007/07/25 13:21:37 2007/07/25 13:21:37