Memory Function - Medline MDS4001 Manual Del Usuario

MEMORY FUNCTION

Memory Input
When a valid measurement is made, the result (systolic, diastolic,
pulse rate, date and time) will be stored in the memory auto-
matically as soon as the device is turned off or when another
measurement is initiated. The device can store up to 90 readings
for each of 2 users, and also compute the average of the latest
3 readings. When more than 90 readings are stored, the oldest
ones will be replaced.
Memory Recall
1.When the display is off, press the MEM button to show the
average (AVG) of all recorded results.
2.Press the MEM button again and 01 will appear in the lower
right hand corner, indicating the latest measurement in the
memory.
3.Continue pressing the MEM button to display additional past
readings, sequentially.
Memory Erase
1.When the display is off, press the MEM button.
2.Press the MEM button again and hold it down for more than 3
seconds to erase all stored results.
20
Memory
Frequency