Led Signals - SMA SUNNY TRIPOWER CORE1-US Serie Instrucciones De Uso

3 Product Overview
SMA Smart Connected is activated during registration in Sunny Portal. In order to use SMA Smart
Connected, it is necessary that the inverter is permanently connected to Sunny Portal and the data
of the PV system operator and qualified person is stored in Sunny Portal and up-to-date.
Universal mounting system (UMS_Kit-10)
The universal mounting system enables wall mounting of the inverter or serves as platform for higher
mounting on the ground. The universal mounting system is available as an accessory.
3.4

LED Signals

The LEDs indicate the operating state of the inverter.
LED signal
The green LED is flashing
(two seconds on and
two seconds off)
The green LED flashes
quickly
The green LED is glowing
The green LED is pulsing
The green LED is off
The red LED is glowing
The blue LED flashes slowly
for approx. one minute
The blue LED flashes quickly
for approx. two minutes.
The blue LED is glowing
18 STP33-62-US-41-BA-en_es-10
Explanation
Waiting for feed-in conditions
The conditions for feed-in operation are not yet met. As soon as the
conditions are met, the inverter will start feed-in operation.
Update of central processing unit
The central processing unit of the inverter is being updated.
Feed-in operation
The inverter feeds in with a power of at least 90%.
Feed-in operation
The inverter is equipped with a dynamic power display via the green
LED. Depending on the power, the green LED pulses fast or slow. If
necessary, you can switch off the dynamic power display via the
green LED.
The inverter is not feeding into the utility grid.
Event occurred
If an event occurs, a distinct event message and the corresponding
event number will be displayed in addition on the inverter user inter-
face or in the communication product.
Communication connection is being established
The inverter is establishing a connection to a local network or is es-
tablishing a direct connection to an end device via Ethernet (e.g.
computer, tablet PC or smartphone).
WPS active
The WPS function is active.
Communication active
There is an active connection with a local network or there is a di-
rect connection with an end device via Ethernet (e.g. computer,
tablet PC or smartphone).
SMA Solar Technology AG
User Manual